Pepwave Device Connector IP55

Pepwave's Device Connector IP55 is not a stand-alone router but rather an independent Wi-Fi Bridges full of fantastic features (listed below) that can expand the Wi-Fi capabilities of and add additional long-range Wi-Fi-as-WAN capabilities to your router. The Device Connector IP55 has a waterproof IP55 enclosure that stands up to dust, vibration, and inclement weather.

Vendor Neutral Long Range Wireless Bridge - The Device Connector IP55 enables Ethernet devices to access wireless networks with unbreakable reliability. Using our signal bonding technology, Ethernet devices can connect using the combined bandwidth of 2.4GHz and 5GHz frequency Wi-Fi in a single LAN connection. The Device Connector is compatible with any access point, so you can just drop it in and go – no network reconfiguration or device upgrades needed.

Need to Connect to Wi-Fi? - Get the Coverage You Need Without Setup. Plug-and-Play. Easily extend Wi-Fi coverage in minutes with Pepwave’s Device Connector IP55. The Device Connector gets your devices talking over a large area without wires or configuration headaches. And because it works transparently at Layer 2, the Device Connector is compatible with any access point.

Need More Reliability? - Turn your 2.4GHz and 5GHz Signals Into One Connection. Normally, Wi-Fi devices will force you to choose between 5GHz or 2.4GHz. With the Device Connector IP55, you can have both. Simply connect your device to the Ethernet port and the device connector will combine 5GHz and 2HGz into a single reliable connection.

Jumping Between APs? - CarFi Fast Roaming. WAN Reliability with Wi-Fi Mobility. CarFi Fast Roaming, let your Device Connector IP55 seamlessly hop from AP to AP in a matter of seconds. Whether you're commanding an emergency situation, coordinating a construction project, or keeping your warehouse stocked, CarFi Fast Roaming keeps everyone communicating at all times.

Compact Super-Duty IP55 Enclosure - The Device Connector IP55 has a waterproof IP55 enclosure that stands up to dust, vibration, and inclement weather

Point-to-Point Deployment - Using the Device Connector IP55, the IP camera is able to upload videos using both the 5GHz and 2.4GHz frequencies at the same time. If one frequency loses connectivity, the other will seamlessly take over. If the network is using an AP from another vendor frequency combination can also be achieved by forming a SpeedFusion tunnel between the device connector and a SpeedFusion-enabled router.

One Access Point, Multiple Devices - Multiple devices could connect to headquarters using both the 2.4GHz and 5 GHz frequencies coming from a single AP. This is achieved by hooking up a Device Connector IP55 to each device, and then connecting them any AP. Using this configuration, the device connectors will be able to form SpeedFusion connections with the Balance Router located at the network infrastructure, providing the enhanced reliability of combined bandwidth.

SpeedFusion Between Wi-Fi and Landline - The Device Connector IP55 can also combine a wired landline connection and a Wi-Fi connection. This configuration provides extra connection resilience and diversity: if one connection breaks, the other can still take over.

Multiple Devices, Multiple Access Points - Even with each frequency coming from a different AP, the Device Connector IP55 can combine the 2.4GHz and 5.0 GHz frequencies. To do so, simply place a SpeedFusion enabled router at your network infrastructure to receive the combined traffic. This configuration provides additional reliability; if one AP ceases to function for any reason, all devices can still connect using the other AP.

Features:

• Product Code - DCS-GN-IP55
• Wi-Fi Interface - 802.11ac wave 2/ac/a/b/g/n Wi-Fi WAN and AP
• Enclosure - IP55 Outdoor Enclosure
• Weight - 1.15 pounds 520 grams
• Power Input - 802.3at PoE+ (56V Pepwave Passive PoE Input is Needed for full 1x 802.3at PoE+ LAN Output (PoE injector available separately)
• Power Consumption - 22 W (max.)
• Operating Temperature - 40 ° – 131 °F -40 ° – 55 °C
• Humidity - 15% – 95% (non-condensing)
• Certifications - FCC, CE, RoHS
• Warranty - 1-Year Limited Warranty

Package Content

• Device Connector IP55
• 2 x Plastic Cable Tie

About the Optional Additional Warranty & Licenses:

EssetialCare

All Peplink products come with a one-year standard warranty. This warranty period can be extended for an additional 2 years. The EssentialCare extended warranty includes:

• Access to InControl 2
• Firmware upgrades
• Warranty protection.
• Non-transferable and non-refundable based on manufacturer policies